Yokogawa DAQWORX - Manual (Page 75)

4-28 IM WX102-01E
4.14 Event/Action, Match Time, and Group Settings
Event/Action and Match Time settings are possible for the DA100, if the (/M1) Math
option is being used, or if a pulse module is attached.
For DA100 and DC100, Group settings are possible if the Math option is being used.
1 Click the Event/Action tab, or select Settings > SET (Regular) Settings > Event/
Action, > Match Times, or > Groups, from the menubar. The Event/Action, Match
Time, Groups setting screen will open.
Group settings
Match time settings Action settings
Edge/Level settings Event settings
Remote, Relay, Timer, and Match Time number settings
2 Select an Event using the pull-down menu which appears when you click the
setting area below the Event label.
3 If you use REMOTE, RELAY, TIMER, MATCH TIME, or (for the DR) MFUNC as
an Event setting, enter the appropriate number.
4 Select the Edge or Level mode in the setting space under the Mode label.
5 Select an action in the setting space under the Action label. The kind of actions
you can select depends on the events selected earlier.
6 Depending on the action selected above (5), it may be necessary to make
additional settings on the right of the setting space under the Action label. Use the
pull-down menu to make a selection..
7 Set the Match Times, days and time, in the Match Times dialog box.
8 Make the Groups setting. Divide the channels you choose for the Group setting
by commas. Between a continuing series of channel numbers place a hyphen.
For example : 001,005,008
001-005 (channel 001 to 005)