Yokogawa DAQWORX User Manual
Page 41
3-3
IM WX102-01E
1
2
3
4
5
6
7
8
9
10
11
Index
Software Configurator
5
Enter the appropriate setting values for IP address, Subnet Mask, and Default
Gateway.
Note
Settings of IP address, Subnet Mask and Default Gateway can be made on the DC100, or DR.
6
After making the settings click OK, and again OK when a reconfirmation message
appears, to activate the new network address (IP address, Subnet Mask, and
Default Gateway). Click Cancel to finish settings.
7
Click OK when asked Close Network?, to finish the setting.
Note
When running under Windows XP or Windows Vista or Windows 7, the Windows firewall
sometimes prevents entry of the DAQ32Plus IP settings. If this occurs, you must disable
the Windows firewall or add a Windows firewall exception. For instructions on how to add
the DAQ32Plus Launcher as a Windows firewall exception, see the appendix in “WX1000
DAQWORX Installation & Operation Guide” (IM WX1000-01E).
3.2 Network Settings