Yokogawa DAQWORX - Manual (Page 99)

4-52 IM WX102-01E
Printing when chart speed is changed (SPEED CHANGE PR)
When the chart speed is changed in dot-recording, select whether to print with the
changed chart speed or not.
• OFF : does not print.
• ON : prints.
Printing recording start/stop time mark (ON/OFF MARK PR)
In dot recording, select whether the record-start/stop time is printed or not.
• OFF :
not printed.
• ON : printed.
Number of columns for digital printing (DIGITAL PR CLMN)
Select the amount of channels to be printed in one horizontal line.
• Select 1, 2, 3, or 4 columns.
• If Tag has been selected in selecting the channel number/Tag, this is limited to 3
columns. If Tag is set to 16 characters, the Tag entry is limited to two columns.
Channel number printing pitch (CHANNEL PITCH)
For dot recording, select the number of millimeters for the channel number printing
interval. When Tag has been selected in channel number/Tag selection, the Tag
corresponding to the channel number is printed.
• OFF : not printed.
• 5.0 mm : printed every 5.0 mm.
• 12.5 mm : printed every 12.5 mm.
Title printing pitch (TITLE PITCH)
For dot recording, select the title printing interval in millimeters.
• OFF : not printed.
• 600 mm : printed every 600 mm.
• 1500 mm : printed every 1500 mm.
Scale check mark printing (SCALE TIC PR)
For dot recording, a tic mark indicating the scale mark positions can be printed.
• OFF : no mark printing.
• ON : printing the tic mark.
Horizontal or vertical printing (LOG FORMAT)
In logging mode, select either horizontal or vertical printing of the channel number/Tag.
• Horizontal :
horizontal printout
• Vertical : vertical printout
Recording Interval in Digital Printing/Logging Mode (LOG INTERVAL)
Select to record channel numbers/Tags and measured values at one interval or at a
selected interval for each channel using the 6 timers.
SINGLE:
• Digital print : The interval is determined by the chart speed and the number of
columns to be printed.
• Logging mode : interval for timer No. 1.
MULTIPLE : intervals selected for each channel from 6 kinds of timers for either Digital
printing or the Logging mode.
4.26 Setting the Recording Format (DR only)