Yokogawa DAQWORX - Manual (Page 49)

4-2 IM WX102-01E
Selecting Setting Screen
Settings screen contents differ depending on whether a DA100, DC100, or DR is the
object. Select a setting screen by selecting Settings > SET (Regular) Settings, or Settings
> SETUP (Basic) Settings, followed by the desired setting item; or by clicking a contents
tab. Below examples of instrument setting screens.
DA100
DC100
DR
System Configurations
Changing any of the system configurations, will result in initialization of Hardware
Configurator settings. Therefore, perform system configuration (Config. > System
Configuration...) before making any other settings.
4.1 Using DARWIN Hardware Configurator