Yokogawa DAQWORX - Manual (Page 173)

7-4 IM WX102-01E
7.4 Saving Tag Data to a Tag File, Writing Tag Data
to DC100/DR
Saving the modified tag data to a file
1 Click the save button on the toolbar or click Save from the File menu.
Save button
Note
There is only one tag file. Thus, the new tag data will overwrite the previous tag file.
Writing the new tags and tag IDs to the DC100, DR
1 Select either to send the Tag Nos. or Tag Comments in the tag data file. Click the
Send Tag No. button or Send Tag Comment button on the toolbar or point to Send
from the File menu and select Send Tag No. or Send Tag Comment.
Send Tag No. button
Send Tag Comment button
The Tag Nos. or Tag Comments will be set as tags for the DC100 and DR.
Note
• The first eight characters will be set as tags if you send Tag Comments to the DC100.
• The DR and DC100 consider all characters besides the following characters to be spaces.
Numbers
Upper and Lower case alphabet
# % & ( ) * + - . /