Yokogawa DAQWORX - Manual (Page 158)

6-22 IM WX102-01E
5 Click OK in the xxx Conversion dialog box.
The measurement data is converted into the selected data format, and saved in a
file.
Note
• The range of the data you wish to convert, indicated in each xxx Conversion dialog box, is
automatically set to the range specified by cursor A and B. If the range is not specified by
the cursors, or if the cursors have been deleted, the first data point is automatically set to 0,
the final to the last recorded data point minus 1.
• The file extension of the conversed file is automatically changed to the following format
names, to distinguish it from the original file: Excel conversions (possible for version 8.0
(Excel97) or higher) get the extension “xls”, ACSII files “txt”, and Lotus (possible for version 2.0
or higher) files get the extension “wj2.”
• For Lotus 1-2-3 and Excel there is a limit to the data that can be read. When the memory of
your PC is not sufficient, data may not be read even though the data limit is not exceeded.
• Files with converted formats are saved to the same directory as the original.
• Do not select external media like floppy disk to save data.
• Do not select save data in a root directory.
• Make sure there is enough memory before saving data.
6.14 Converting the Data Format