Yokogawa DAQWORX - Manual (Page 37)

2-4 IM WX102-01E
2.3 Switching and Protecting Projects
Switching Projects
1 Close all DAQ 32 Plus software of before switching to a new Project in the Project
Settings dialog box. Open the Project Settings dialogbox by clicking the Project
Settings button (see below) or click the Menu button and select Project settings...
.
Menu button Project Setting button
Project name
2 Select the desired Project from the Select Project pull-down menu.
If the Password Protection hasn’t been activated the Project Settings dialogbox of
the selected Project will appear. If Password Protection is active a dialog will first
appear in which you have to enter the password. Click OK to open the selected
Project.
Protecting Projects
To prevent the currently used Project from being changed the Password Protection
should first be activated. Read the last Section on how to activate the protection. After
you activated the Password Protection lock Projects as described below.
1 Close all DAQ 32 Plus software and click the Lock button (see below) on the
Launcher toolbar. If the Launcher toolbar colors pink, the Project is locked.
Lock button Pink when a Project is locked
2 To release the lock, close all DAQ 32 Plus software, and click the Lock icon. The
Password Setting dialog box will appear.
3 Enter the password and click OK. The Project lock will be released.