Yokogawa DAQWORX - Manual (Page 156)

6-20 IM WX102-01E
6.13 Saving Display Conditions
It is possible to save waveform and digital value Sheet conditions to a file.
Note that of one measurement data file, only one display condition can be saved. If you
save new data, they will overwrite data you saved earlier to the file.
To save display conditions, select File > Save Display Settings, or click the Save Display
Settings button on the toolbar (see below).
Save Display Settings button
The file name will be the name of the displayed data file, plus the extension .ddw.
For example If the filename was abcde.dat, the saved file’s name will be abcde.dat.ddw.
Note
• The following information is saved to the file:
• Waveform display area.
• Active waveform
• Brightness of waveform and grid.
• Printing title.
• Positions of cursor A and cursor B.
• General display setting conditions.
• Selected Group
• Displayed waveform timing On/Off.
• Y-axis details (channel No., waveform display On/Off, scale, zone, trip point 1, trip point 2,
waveform color).
• Selection of channel No./Tag/Tag ID.
• Mark information.
• X-axis magnification factor.
• X-Axis scale (Time, Data No., etc).
• Logic display On/Off.
• Y-Axis zone (Auto, User, Full, or Slide zone).
• Alarm display condition.
• The file with display conditions will be saved to the directory in which the data file was
saved.
• The display conditions file can be unlimitedly overwritten.