Yokogawa DAQWORX - Manual (Page 136)

5-26 IM WX102-01E
5.16 Using the Monitor Server
The Monitor Server supplies PCs (remote monitors) connected to a network with
measurement data.
See Chapter 9, “Remote Monitor Software.”
Operating Procedure
1 Select Option > Run Monitor Server,
Monitor Server icon
Client name
Communication port settings
2 Select Monitor Server > Port No… to open the port number dialogbox.
3 Enter the port number in the dialogbox and click OK.
Note
• The initial Port No. value is 50278. To change it select a number from 0 to 65535.
• The Port No. set for the Remote Monitor must match the Port No. set for the Monitor Server.
Pausing data renewal
To stop data at the Remote Monitor from being renewed select from the Monitor Server
menubar, Monitor Server > Pause.
Quitting the Monitor Server
Select Monitor Server > Exit from the menubar. (If the Monitor Server window is not being
displayed, click the Monitor Server icon on the Logger window to make it appear.)