4 opening and closing each software, 4 opening and closing each software -7, Index – Yokogawa DAQWORX User Manual

Page 15: Opening daq 32 plus software

Advertising
background image

1-7

IM WX102-01E

1

2

3

4

5

6

7

8

9

10

11

Index

Before Operation

1.4

Opening and Closing each Software

Opening DAQ 32 Plus Software

1

Select from the Start Menu, Program > YOKOGAWA DAQWORX > DAQ 32 Plus

> Launcher.

When the Launcher software is activated, the below Launcher buttons will appear

in the top of your screen. From the left to the right use the Menu button, Logger

button, Historical Viewer button, File Utility button, Remote Monitor button,

DARWIN hardware configuration button, Software configuration button, and Tag

Editor button.

Tag Editor start button

DARWIN Hardware Configurator start button

Software Configurator start button

Historical Viewer start button

Logger start button

Menu button

Launcher button

Task bar

Remote Monitor start button

File Utility start button

2

Open the desired software by clicking its Launcher button. You can also select the

software after right-clicking the DAQ 32 plus icon on the taskbar (see below).

Note

• To simultaneously open several Historical Viewer screens, open Historical Viewer by

selecting from the Start Menu, Program > YOKOGAWA DAQWORX > DAQ 32 Plus >

Historical Viewer.

When Historical Viewer is opened like this, data which are actively being recorded with

Logger software cannot be viewed.

• Software which can be activated simultaneously are Logger software, Historical Viewer,

File Utility software, Remote Monitor software, and DARWIN hardware configuration
software. Tag Editor software can be simultaneously used with Historical Viewer/ File Utility
software/ Remote Monitor software. Remote Monitor software, and Software configuration
software, can also be used simultaneously. Other software combinations can’t be activated

simultaneously.

First exit the non-matching software to activate the launcher icons for other software.

• When using a DC100 or DR for the first time, make sure to configure the devices with the

actual device. After this initial configuration you can use DAQ 32 Plus software, to make

configurations.

Advertising
This manual is related to the following products: