Yokogawa DAQWORX - Manual (Page 107)

4-60 IM WX102-01E
4.33 Saving Setting Data
Save the DARWIN Hardware Configurator settings as follows:
1 Select File > Save, or Save As... from the menubar. You may also use the save
icon
2 If you choose Save As... you will be requested to select where to save the file to,
and to enter a File name and Comment. After this click the Save button.
Comment
Saved data info
File name
Select a file type
(same as the to
be saved file)
Saving direction
File overview
• Depending on the kind of data, the below extensions will automatically be
added to file names.
.ast : for a DA100 settings data file.
.rst : for a DR settings data file.
.cst : for a DC100 settings data file.
.set : for a data file containing SET (Regular) Settings created with a DC100
or DR.
.pnl : for a data file containing SETUP (Basic) Settings created with a DC100
or DR.
• A Comment can only be set for DA 100 (.ast), DR (.rst), and DC100 (.cst) data
files.