Yokogawa DAQWORX - Manual (Page 117)

5-7 IM WX102-01E
1
2
3
4
5
6
7
8
9
10
11
Index
Logger Software
7 Click the channel numbers you want to copy the base settings to. The display
color will change. Drag the mouse point down from the first to the last channel, if
you wish to copy to a successive series of channels.
8 To copy the base channel to the selected channels, click the Paste button.
Setting the same amount of channels for each Group automatically
There are 2 methods to set the same amount of channels for each Group automatically:
• Put all active channels from the DA100/DC100/DR in successive groups.
• Using the groups created in the above explained way, make successive regroupings.
For example an automatic regrouping per three channels looks as follows:
Before setting After Setting
Group 1 W01 CH001 Group 1 W01 CH001
W02 CH002 W02 CH002
W03 CH005
Group 2 W01 CH005
W02 CH006 Group 2 W01 CH006
W03 CH007 W02 CH007
W04 CH008 W03 CH008
W05 CH009
Group 3 W01 CH009
Group 2 W01 CHA01 W02 CHA01
W02 CHA02 W03 CHA02
W03 CHA03
W04 CHA04 Group 2 W01 CHA03
W02 CHA005
1 Select Logging > Auto Grouping... to open the Automatic Group Setting dialog
box.
2 Select whether you wish to group current display settings or not.
3 Enter the amount of channels you desire per group.
4 Click OK to start automatic grouping. In case the General Display Settings dialog
box is still open while you make above settings, you will have to close and reopen
it once to apply the changes.
5.3 Group Settings