Yokogawa DAQWORX - Manual (Page 82)

4-35 IM WX102-01E
1
2
3
4
5
6
7
8
9
10
11
Index
DAR
WIN Hardware Configurator
4.16 Printing Settings (DR Only)
The following print setting can be made for DRs:
• Recording Mode (Trend or Logging)
• Trend Printing interval (Fixed or Automatic)
• Chart speed
• Chart speed 2
• Header
• Title
• List Format
To open the Printing related setting screen (see below), click the Printing tab, or select
Settings > SET (Regular) Settings > and either Recording Mode, Chart Speed, Chart
Speed 2, Header, Title, or List Format, from the menubar.
Title settings
Choose list
printing items
Header settings
Recording
interval
Chartspeed 2
settings
Chart speed settings
Printing tab
Recording
modes
Recording Mode Settings
The following types of recording mode can be selected.
• LOGGING (LOGGING MODE) : measurement values will be printed out as digital
values.
• TREND (ANALOG TREND MODE) : measurement values will be recorded as analog
trends (dot recording) and printed out as digital
values.
• Selecting the recording interval
This setting can only be done for the TREND mode.
FIX : Recording takes place at intervals equal to the measurement period (scan interval).
However, if the measuring period is 0.5 or 1 second, the recording interval is fixed
to 2 seconds. The measured data during the excess period is ignored.
AUTO : recording takes place at intervals automatically decided by measurement
interval and chart speed.