Yokogawa DAQWORX - Manual (Page 5)

iv IM WX102-01E
How to Use this Manual
Structure of the Manual
This User’s Manual consists of eleven chapters and an Index as described below.
Please read Chapters one, six, nine, and ten to use DAQ 32 Plus Client Package.
Chapter Title Description
1 Before Operation Describes the environmental conditions required
from your PC to use this software (Windows
version), as well as the installation method of the
software.
2 Communications software Describes how to operate Launcher software to
start each DAQ 32 Plus software. Also explains
the Project function to protect software settings.
3 Software Configurator Describes how to make communication settings
and how to specify the directory in which data are
to be collected. It also describes how to confirm
system configuration, and how to initialize settings.
4 Darwin Hardware Configurator Describes how to make DARWIN hardware
settings such as input range, alarm relay and
initialization.
5 Logger Software Describes how to operate the software to display
measured data on the monitor screen, save it to
a PC and print it out. Explains also how to save
report data to the harddisk.
6 Viewer Software Describes how to operate the software to monitor
the collected data saved on the harddisk and
convert it to various formats (ASCII etc.)
7 Tag Editor Describes how to acquire, write, or set tags that
are set with DARWIN hardware.
8 Calibration Describes how to calibrate DARWIN hardware.
9 Remote Monitor Describes data observation functions for a remote
monitor connected to DARWIN hardware and a
network.
10 File Utility Describes how to divide or unite data logging files,
and how data logging files and report files can be
into converted into Excel, ASCII, or Lotus 1-2-3
formats.
11 Troubleshooting Describes what to do in case trouble occurs and
provides a list of error messages with corrective
actions.
Index Terms used in this manual listed in alphabetical
order.
Range of Descriptions Given in this Manual
This manual does not explain the basic operations of your PC's operating system (OS).
For a description, refer to its User’s Manual.
Conventions used in this Manual
• Unit
k: Denotes “1000.” Example: 100 kHz
K: Denotes “1024.” Example: 100 KB
M: Denotes “1024K.” Example: 100 MB
G: Denotes “1024M.” Example: 2 GB
Note
Make sure to read manual Notes (with Note as title, and between lines as in this example).
They contain important information for operating DAQ 32 Plus software.