Yokogawa DAQWORX - Manual (Page 195)

10-4 IM WX102-01E
10.3 Dividing Measurement Data Files
Files with “daq”, “bfd”, “y**”, “dat”, and “das” extensions can be divided into multiple files.
The output file name will automatically get extension “daq.”
Files can be divided in three different ways (division types):
• Division Point
The original file is divided into multiple files by creating intervals “per Day” or “per
Hour.” For the “per Day” interval setting, an additional “Fixed Time of Day” division is
possible.
• Interval Length
The original file is divided into multiple files with a fixed data count or time count used
as interval.
• Single Fixed
A fixed file part is selected between certain data numbers or between a certain time
span to create a single new file.
Note
The last file of files divided with Division Point or Interval Length will be shorter if the data count
does not fit exactly.
1 Click the Divide tab to display the Divide settings.
2 Specify the original file in the Input frame. Select File or Directory in the Input
Type listbox.
Note
When Directory is selected, all files in the directory that apply to the division conditions will be
divided.
3 Click the Select button and in the dialog box that opens select the desired file or
directory.