Yokogawa DAQWORX - Manual (Page 157)

6-21 IM WX102-01E
1
2
3
4
5
6
7
8
9
10
11
Index
Historical V
iewer Software
6.14 Converting the Data Format
With waveforms or digital values displayed, you can convert measurement data into one
of three data formats, ASCII, Lotus 1-2-3 and Excel.
1 Select Convert > and, to ASCII, to Lotus, or to Excel.
2 Using each xxx Conversion Details dialog box, enter the range of the data to be
converted (the first and last data point) and the step (e.g. if you enter “3”, two
out of three consecutive data items are skipped; to convert all of the data in the
specified range, enter “1”). Click the check box of each channel which data you
wish to convert.
3 Select Group or Channel, and enter the desired values in the textbox. When
selecting Group, enter the desired values in each textbox. When selecting
Channel, first click the Channel No. buttons to open a Channel number table, and
then click the desired channel number. The table will be closed and the channel
number will be input.
4 If you wish to save to a different folder or file, click File... .
Select a file name from the File Name box, or type a file name in the text box. If
necessary, select the type of folder or file in which the data is to be saved.
Click Save.