Yokogawa DAQWORX - Manual (Page 11)

1-3 IM WX102-01E
1
2
3
4
5
6
7
8
9
10
11
Index
Before Operation
Remote Monitor software
The Remote Monitor function is used to observe DARWIN data with a personal computer
connected to the host through a network. Also, using Gate software applications, you can
use the DX100P/DX200P, WT series instruments, or DAQ32Plus to acquire or monitor
data using the Remote Monitor from other devices that are not directly compatible,
including Yokogawa or other manufacturer’s measuring instruments and OPC servers
(DCS and PLC etc.). It is possible to display the same monitors as for Logger software:
an Alarm Monitor, Trend Monitor, Color Graph Monitor, Digital Monitor, and a Meter
Monitor.
An Ethernet port is required for the PC (host/remote monitor), and Windows TCP/IP
protocol must be installed.
Furthermore, for the host it is necessary that DAQ 32 Plus Logger software is
communicating and that the monitor server is operating.
File Utility software
Allows you to create files by merging or dividing existing measurement data files. Also
used to convert measurement data and report data into Excel/ASCII/Lotus 1-2-3 formats.
Functions and object files are as follows:
Merging Measurement Data Files (Merge): Used to merge continuous files into a new
file.
• For measurement data files created with DAQ 32 R9 or later/DAQ 32 Plus R9 or later.
• For measurement data files being merged or divided with File Utility.
Dividing Measurement Data Files (Divide): Used to divide one file into multiple files.
• For measurement data files created with DAQ 32 R9 or later/DAQ 32 Plus R9 or later.
• For measurement data files created with software of earlier purchased versions of the
DARWIN series (DOS, or Windows).
• For measurement data files created with DR/DC100.
• For measurement data files being merged or divided with File Utility.
Converting Data (Convert): Used to convert data into Excel/ASCII/Lotus 1-2-3 formats.
• For measurement data files created with DAQ 32 R9 or later/DAQ 32 Plus R9 or later.
• For measurement data files created with software of earlier purchased versions of the
DARWIN series (DOS, or Windows).
• For measurement data files created with DR/DC100.
• For report files created with DA/DR/DC100 with report options (/M3).
Restructuring Files (Restruct): Used to merge continuous files into a new file and divide
them with a new condition
• For measurement data files created with DAQ 32 R9 or later/DAQ 32 Plus R9 or later.
• For measurement data files being merged or divided with File Utility.
DAQ 32 Plus Client Package
DAQ 32 Plus Client Package consists of three kinds of software.
• Remote Monitor software
• Viewer software
• File Utility software
Operation for each software is equal to DAQ 32 Plus. For details please refer to the
explanation for DAQ 32 Plus.
1.1 DAQ 32 Plus/DAQ 32 Plus Client Package Introduction