Yokogawa DAQWORX - Manual (Page 152)

6-16 IM WX102-01E
6.10 Displaying Alarm Info
Alarm info can be displayed on the waveform screen, on the digital value Sheets, and in
the cursor control dialog box.
Click the Alarm button on the toolbar (below), or select Display > Alarm.
Alarm button
Waveform display
Level 1
Level 2
Level 3
Level 4
Alarm display
Digital value sheets
Alarm Indicator
Level 1 Level 2 Level 3 Level 4
Cursor control dialog box
Alarm display
Note
• If alarm display is set ON or OFF in any of the above displays, the same will happen in any
of the other displays
• Alarms of the active waveform will get displayed. In the waveform display the alarms will
get displayed in the color of the waveform with an alarm occurrence.
• If there are no alarm data in the loaded file, selecting View > Alarm will not be possible.