Yokogawa DAQWORX - Manual (Page 201)

10-10 IM WX102-01E
10.5 Restructuring Measurement Data Files
The “Restruct” function enables you to restructure data files by both Merging and Dividing
them simultaneously. Files can be merged into a new file and divided into multiple files
with new conditions.
Only files with a daq extension can be restructured.
For the output file name the extension will automatically be set to “daq.” A follow-up
number will be added behind the original file name for distinction.
For example: file name_0000.daq (0000 being the follow-up number).
1 Click the Restruct tab to display the setting window for file restructuring.
Selecting files to merge
2 To specify the original files you want to merge, first click the Select… button in
the Input frame. In the dialog box that opens select the directory with the files you
want to merge.
3 If there are different measurement data groups in the directory Group tabs will be
displayed. Files within the same group can be merged. Click the Desired Group
tab.
4 Select the files to be merged by dragging the numbers’ column on the left side of
the file list.
Note
• If you don’t select any specific files, all the files within the group will be merged.
• To undo a selection, drag again.
Selecting the directory to save files to
5 In the Output frame select the directory to save the divided files to. Click the
Select button and choose a directory in the dialog box.
Note
• Do not select external media like floppy disk to save data.
• Do not save data in a root directory.
• Make sure there is enough memory before saving data.