6 changing monitor display, 6 changing monitor display -12 – Yokogawa DAQWORX User Manual

Page 122

Advertising
background image

5-12

IM WX102-01E

5.6

Changing Monitor Display

General Display Settings

1

Click the General Display Settings button on the Monitor toolbar, or select View >

General Display Settings, to open the General Display Settings dialog box.

See Section 5.3, “Group Settings for details.”

Changing the Time Axis of the waveform display

To change the Time Axis of the waveform display, select TimeAxis > and Absolute Time,

or Relative Time from the Trend monitor menubar.

• Absolute time shows the actual time during display.
• Relative time shows the time lag from the first displayed data.
The time axis scale, and grid division will change automatically, depending on the

displayed time range.

Enlarging or reducing the Time Axis scale

To change the Time Axis scale, use the Zoom In or Zoom Out buttons, or select TimeAxis

> and Zoom In or Zoom Out, .
Zooming will change display in the order: 1/20x, 1/10x, 1/5x, 1/2x, x1, 2x, 5x, 10x, 20x.
The most detailed possible display may however vary depending on the pixel amount in

the display area.

Selecting the waveform display zone

Use the below zone buttons on the monitor toolbar, or select Y-Axis > and the desired

zone.

Auto Zone

Slide Zone

User Zone Full Zone

Edit Zone

Multi-Axis Zone

Select the Edit Zone, User Zone, Full Zone, Slide Zone, Auto Zone, or Multi-Axis Zone.

• Edit Zone

If the Edit Zone is selected, it is possible to change zones simply be pulling the

channel zone display, on the right of the window on right side of the waveform display

window up (Zone top adjustment) and down (Zone bottom adjustment). The zone
settings will be reflected in the General Display Settings dialog box.

Zone display bar

Zone bottom

adjustment

Zone top

adjustment

Active waveform

Advertising
This manual is related to the following products: