5 stopping or pausing monitor display, 5 stopping or pausing monitor display -11 – Yokogawa DAQWORX User Manual
Page 121
5-11
IM WX102-01E
1
2
3
4
5
6
7
8
9
10
11
Index
Logger Software
5.5
Stopping or Pausing Monitor display
Pausing monitor display
When monitoring is paused, data acquisition continues. When restarting the display, data
acquired during the pause will be displayed.
1
To pause, click the red Pause button above each monitor.
Pause button
2
To resume monitoring, click the Pause button again.
Closing monitor display
When a monitor is closed, data acquisition continues. When reopening the display, data
acquired during the pause will be displayed.
To close a monitor click from the menubar ‘x’ Monitor > Exit
Stopping monitor display
When monitoring is stopped, data acquisition also stops, and no more data will be
displayed.
1
To stop monitoring click the Stop button on the Logger toolbar.
Monitor/Record stop button
If monitoring and recording are active simultaneously, clicking the Stop button will
first result in stopping the Record function. Click Stop again to stop the Monitor.