GW Instek PEL-2000 Series Programming User Manual - Manual (Page 101)

COMMAND DETAILS
101
:PROGram:RUN
All Channel
Command
Description Runs the current program number when set to on,
and when set to off will allow all the
program/sequence data to be programmed.
Syntax :PROGram:RUN {OFF|0|ON|1}
Parameter OFF/0 OFF
ON/1 ON
Example :PROG:RUN 1 Runs the program.
:PROGram:SAVE
All Channel
Command
Description Saves the current program to memory.
Syntax :PROGram:SAVE
Example :PROG:SAVE Saves the program to
memory.
:PROGram:PFTime
Program Number
Specific
Description Sets the P/F-Time (pass/fail time) for the current
program sequence in seconds.
Syntax :PROGram:PFTime <NRf>[S]
Parameter <NRf>[S] P/F Time
0.0 0 seconds = OFF
0.1~119.9 0.1~119.9 seconds
0.1~119.9S 0.1~119.9 seconds
Example :PROG:PFT 0.5 Sets the P/F-Time to .5
seconds
Query Syntax :PROGram:PFTime? <NR2>
Return Parameter <NR2> 1 unit = 1 second Short Time