GW Instek PEL-2000 Series Programming User Manual - Manual (Page 28)

PEL-2000 Programming Manual
28
Return Parameter <NR1> Bit(s) Set <NR1> Bit(s) Set
4 QYE 32 CME
8 DDE 64 ~
16 EXE 128 ~
Example *ESR?
48 The return value is the
status reading of the
standard Event Status
Register.
*IDN? System Command
Description Returns the load generator identification.
Query Syntax *IDN?
Return Parameter <aard> Data <aard> Data
GW Manufacturer XXXXXXXX Serial No.
PEL-2000 Model V1.00 Firmware
Version
Example *IDN?
GW, PEL-2002/2004,
00000001, V1.00 Returns the mainframe
identification string.
*OPC Status Command
Description This command sets the OPC (Operation Command
Bit) bit (bit 0) of the Standard Event Status Register
after the mainframe has completed all pending
operations. Page168.
Syntax *OPC
Example *OPC Sets the OPC bit.
Query Syntax *OPC?
Return Parameter <NR1> Operation <NR1> Operation
0 Pending 1 Complete