GW Instek PEL-2000 Series Programming User Manual - Manual (Page 91)

COMMAND DETAILS
91
:OCP:CHANnel:DELay
Channel Specific
Command
Description Queries or sets the test delay time for the OCP Test
Automation function.
Syntax :OCP:CHANnel:DELay {<NRf>[ S ] | MIN | MAX}
Parameter <NRF>[S] The delay time in seconds (5mS~160S).
MAX The maximum delay time.
MIN The minimum delay time.
Example :OCP:CHAN:DEL MAX Set the delay time to the
maximum value.
Query Syntax :OCP:CHANnel:DELay?
Return Parameter <NR2> Returns the delay time in seconds.
Query Example :OCP:CHAN:DEL?
5.0 Returns the delay time.
:OCP:CHANnel:TRIGger
Channel Specific
Command
Description Queries or sets the voltage trigger for when the
power supply OCP has been triggered.
Syntax :OCP:CHANnel:TRIGger {<NRf>[ V ] | MIN | MAX}
Parameter <NRF>[V] The trigger voltage level.
MAX The maximum trigger voltage.
MIN The minimum trigger voltage.
Example :OCP:CHAN:TRIG MAX Set the trigger voltage
level to the maximum
value.
Query Syntax :OCP:CHANnel:TRIGger?
Return Parameter <NR2> Returns the trigger voltage level in volts.
Query Example :OCP:CHAN:TRIG?
5.0 Returns the trigger level.