GW Instek PEL-2000 Series Programming User Manual - Manual (Page 156)

PEL-2000 Programming Manual
156
Query Syntax :SEQuence:CHANnel:TIME?
Return Parameter <NR1> Point
1~max channels Returns the channel
duration time that the
specific channel is using.
Query Example :SEQ:CHAN:TIME?
2 The specific channel is
using the channel
duration setting of
channel 2.
:SEQuence:RUN
Channel Specific
Command
Description Turns the sequence On/Off.
Syntax :SEQuence:RUN {OFF|0|ON|1}
Parameter OFF/0 Off
ON/1 On
Example :SEQ:RUN ON Run the sequence.
:SEQuence:SAVE
Channel Specific
Command
Description Saves the sequence for the specific channel.
Syntax :SEQuence:SAVE
Example :SEQ:SAVE Saves the sequence.
:SEQuence:TRIGger:IN
Channel Specific
Command
Description Turns the trigger input on/off for sequences. See
the :SEQuence:TRIGger:IN:CHANnel command to
set which channels this command applies to.
Syntax :SEQuence:TRIGger:IN {OFF|0|ON|1}
Parameter OFF/0 Off
ON/1 On