GW Instek PEL-2000 Series Programming User Manual - Manual (Page 88)

PEL-2000 Programming Manual
88
:OCP:CHANnel:RANGe
Channel Specific
Command
Description Sets or queries the channel range. High(CC Mode
High) or Low(CC Mode Low)
Syntax :OCP:CHANnel:RANGe {LOW|0|HIGH|1}
Parameter LOW/0 CC Mode Low range
HIGH/1 CC Mode High range
Example :OCP:CHAN:RANG 0 Sets the range to LOW.
Query Syntax :OCP:CHANnel:RANGe?
Return Parameter 0 CC Mode Low range
1 CC Mode High range
Query Example :OCP:CHAN:RANG?
0 The range is CC Mode
Low.
:OCP:CHANnel:STARt
Channel Specific
Command
Description Sets or queries the starting current value.
Syntax :OCP:CHANnel:STARt {<NRf>[ A ] | MIN | MAX}
Parameter <NRF>[A] The current value in Amps.
MAX The maximum current value.
MIN The minimum current value.
Example :OCP:CHAN:STAR MIN Set the start current to
the minimum.
Query Syntax :OCP:CHANnel:STARt? [ MIN | MAX ]
Return Parameter <NR2> Returns the starting current in Amps.
Query Example :OCP:CHAN:STAR? MIN
1.5 Returns the minimum
starting current.