GW Instek PEL-2000 Series Programming User Manual - Manual (Page 78)

PEL-2000 Programming Manual
78
Query Example :LOAD:TIME?
5.1 Returns the load on time
as 5.1 seconds.
:LOAD:DELay
Channel Specific
Command
Description Sets or queries the load delay time for the specific
channel.
Syntax :LOAD:DELay <NRf>[S]
Parameter <NRf>[S] Time
0.1S Sets the delay time to 0.1
seconds.
Example :LOAD:DEL 0.1s Sets the delay time to
0.1s.
Query Syntax :LOAD:DEL?
Return Parameter <NR2> Delay time in seconds.
Query Example :LOAD:DEL?
0.10000 Returns the delay time
for the current channel.
:LOAD:TYPE All Channels
Description Sets or queries which load type is the active type.
Syntax :LOAD:TYPE {LOAD|0|PROGRAM|1|SEQUENCE|2}
Parameter LOAD/0 Normal load
PROGRAM/1 Program
SEQUENCE/2 Sequence
Example :LOAD:TYPE: 1 Program is active.
Query Syntax :LOAD:TYPE?
Return Parameter <NR1> Type
0 Normal load
1 Program
2 Sequence