GW Instek PEL-2000 Series Programming User Manual - Manual (Page 99)

COMMAND DETAILS
99
Query Example :PROG:ACT?
12 Channels 3 and 4 are
active.
:PROGram:CHAin
Program Number
Specific
Description Chains the current program number to a specified
program number.
Syntax :PROGram:CHAin <NR1>
Parameter < NR1 > Program
1-12 1-12
0 No chain/End chain
Example :PROG:CHA 6 Chains the current
program number to
program number 6
Query Syntax :PROGram:CHAin? <NR1>
Return Parameter < NR1 > Program
1-12 1-12
0 No chain/End chain
Query Example :PROG:CHA?
6 Returns the program
number the current
program is chained to.
:PROGram:ONTime
Program Number
Specific
Description Sets the on-time for the program number. 0.1~60
seconds.
Syntax :PROGram:ONTime <NRf>[S]
Parameter < NRf >[S] Program On Time
0.1-60 0.1~60 seconds
0.1-60s 0.1~60 seconds