GW Instek PEL-2000 Series Programming User Manual - Manual (Page 30)

PEL-2000 Programming Manual
30
*SAV All Channels
Description Saves the data memory into the specified save slot.
Syntax *SAV <NR1>
Parameter <NR1> Save slot
1~120 1~120
Example *SAV 2 Saves data memory to
save slot 2
*SRE Status Command
Description The Service Request Enable Command determines
which events in the Status Byte Register are
allowed to set the MSS (Master summary bit) Any
bit that is set to “1” will cause the MSS bit to be set.
See page170 for details.
Syntax *SRE <NRf>
Parameter <NRf> Bit(s) Set <NRf> Bit(s) Set
4 CSUM 32 ESB
8 QUES
16 MAV
Example *SRE 12 Sets bits CSUM and
QUES in the Service
Request Enable register.
Query Syntax *SRE?
Return Parameter <NR1> Bit(s) Set <NRf> Bit(s) Set
4 CSUM 32 ESB
8 QUES
16 MAV