GW Instek PEL-2000 Series Programming User Manual - Manual (Page 40)

PEL-2000 Programming Manual
40
:CONFigure:VOLTage:LATch
Channel Specific
Command
Description Turn Von Latch on or off for the specific channel.
Syntax :CONFigure:VOLTage:LATch {OFF|0|ON|1}
Parameter {OFF|0|ON|1} Von Latch
OFF/0 Off
ON/1 On
Example :CONF:VOLT:LAT 1 Sets Von latch to ON.
Query Syntax :CONFigure:VOLTage:LATch?
Return Parameter <NR1> Von latch status
0 Latched Off
1 Latched On
Query Example :CONF:VOLT:LAT?
1 Von latch is set to ON.
:CONFigure:AUTO:LOAD All channels
Description Configures the load generator for Auto Load On or
Off at start up.
Syntax :CONFigure:AUTO:LOAD {OFF|0|ON|1}
Parameter {OFF|0|ON|1} Auto Load
OFF/0 Off
ON/1 On
Example :CONF:AUTO:LOAD ON Configures Auto Load to
On
Query Syntax :CONFigure:AUTO:LOAD?
Return Parameter <NR1> Auto Load Status
0 Off
1 On