GW Instek PEL-2000 Series Programming User Manual - Manual (Page 152)

PEL-2000 Programming Manual
152
1.2 1.2A/us
1.2 A/us 1.2A/us
MAX/MIN Maximum or minimum
value.
Example :SEQ:POIN:RISE .3 A Sets the rising slew rate
to 0.3 A/us
:SEQ:POIN:FALL .4 A Sets the falling slew rate
to 0.4 A/us
Query Syntax :SEQuence:POINt::RISE/FALL? [MAX|MIN]
Return Parameter <NR1> Slew Rate
1 unit = 1 A/us Returns the slew rate.
MAX/MIN Returns the allowable
maximum and minimum.
Query Example :SEQ:POIN:RISE?
0.30000 Returns the rising slew
rate (0.3 A/us).
:SEQ:POIN:FALL?
0.40000 Returns the falling slew
rate (0.4 A/us).
:SEQuence:POINt:TIME
Channel Specific
Command
Description Sets the duration time of the current point in
seconds.
Syntax :SEQuence:POINt:TIME <NRf>[S]|MIN|MAX
Parameter <NRf> Duration Time
0.0001~60000 0.0001~60,000.0 seconds
0.0001~60000S 0.0001~60,000.0 seconds
MIN 0.0001seconds
MAX 60,000 seconds
Example :SEQ:POIN:TIME 10 Sets the point duration
time to 10 seconds.
Query Syntax :SEQuence:POIN:TIME? [MAX|MIN]