GW Instek PEL-2000 Series Programming User Manual - Manual (Page 35)

COMMAND DETAILS
35
:CHANnel:SYNCon:ALL All Channels
Description Turns independent mode on or off for all the
channels.
Syntax :CHANnel:SYNCon:ALL {ON|1|OFF|0}
Parameter ON/1 ON for all channels
OFF/0
OFF for all channels
Example :CHAN:SYNC:ALL ON
Enables all channels to
receive synchronized
commands
:CHANnel:ID?
Channel Specific
Command
Description Queries the load module identity.
Query Syntax :CHANnel:ID?
Return Parameter <aard> Data <aard> Data
GW Manufacturer 00000001 Serial No.
PEL2020R Channel
load id 1.00 Firmware
Version.
Query Example :CHAN:ID?
GW, PEL2020R, 00000001,
V1.00 Returns the load
module identification
string.
:CHANnel:DISPlay
Channel Specific
Command
Description Sets or queries which channel is active on the
mainframe display.
Syntax :CHANnel:DISPlay <NRf+>
Parameter <NRf+> Channel displayed
1~8 CH1 ~ CH8