GW Instek PEL-2000 Series Programming User Manual - Manual (Page 125)

COMMAND DETAILS
125
Query Syntax :STATus:CHANnel:NTRansition/PTRansition? <NR1>
Return Parameter <NR1> Event <NR1> Event
1 OC 16 OT
2 OV 32 G/N
4 OP 64 UVP
8 RV 128~65535 Not Used
Query Example :STAT:CHAN:NTR?
4 OP is set as a negative
transition.
:STATus:CSUMmary:ENABle
Channel Specific
Command
Description Determines which channels in the Channel
Summary Register group can set the CSUM bit of
the Status Byte Register. The mask values are the
bit weights of each corresponding channel in the
Channel Summary Enable Register. See page 165
for details.
Syntax :STATus:CSUMmary:ENABle <NR1>
Parameter <NR1> Event <NR1> Event
1 CH1 16 CH5
2 CH2 32 CH6
4 CH3 64 CH7
8 CH4 128 CH8
Example :STAT:CSUM: 3 Events from channel 1
and 2 are enabled
Query Syntax :STATus:CSUMmary:ENABle? <NR1>
Return Parameter <NR1> Event <NR1> Event
1 CH1 16 CH5
2 CH2 32 CH6
4 CH3 64 CH7
8 CH4 128 CH8