GW Instek PEL-2000 Series Programming User Manual - Manual (Page 136)

PEL-2000 Programming Manual
136
1 unit = 1 watt Returns the power of the A
Value (L1) or B Value (L2).
MAX/MIN Returns the allowable
maximum and minimum.
Query Example :POW:L2? MAX
357.000 Returns the maximum
power allowed for the
channel. (PEL-2040)
:POWer:CURRent
Channel Specific
Command
Description Sets the current limit for constant power mode.
The command is range dependant. If the current
range is Low, then the command will only apply to
the low range settings.
Syntax :POWer:CURRent <NRf+>[A]
Parameter <NRf+>[A]
1 Sets the current limit to
1A.
1A Sets the current limit to
1A.
MIN Sets the current limit to
the minimum level for the
specific channel.
MAX Sets the current limit to
the maximum level for the
specific channel.
Example :POW:CURR 1 Sets the current limit to
1A.
Query Syntax :POW:CURRent? [MAX|MIN]
Return Parameter <NR2> [MAX|MIN] Current
1 unit = 1 amp Returns the current limit.
MAX/MIN Returns the allowable
maximum and minimum.