GW Instek PEL-2000 Series Programming User Manual - Manual (Page 61)

COMMAND DETAILS
61
AVALue 10 Sets A Value to 10 Amps.
(high range only)
BVALue 20 Sets B Value to 20 Amps.
(high Range only)
AVALue MIN Sets A Value to the
minimum level for the
specific channel.
A Value MAX Sets A Value to the
maximum Level for the
specific channel.
Example :CURRent:STATic:HIGH:AV
ALue 10 Sets high range CC static
mode A Value to 10
amps.
Query Syntax :CURRent:STATic:HIGH:AVALue/BVALue? [MAX|MIN]
Return Parameter <NR2> [MAX|MIN] Auto load mode
MAX/MIN Returns the allowable
maximum and minimum.
1 unit= 1 amp Returns the current of the
A or B Value.
Query Example :CURR:STAT:HIGH:BVALu
e? MAX
20.4000 Returns the maximum
current allowed for the
channel in high range
mode. (PEL-2020)
:CURRent:STATic:HIGH:RISE/FALL
Channel Specific
Command
Description Sets the high range rising/falling slew rate.
Syntax :CURRent:STATic:HIGH:RISE/FALL <NRf+>[A/uS]
Parameter <NRf+>[A/uS] Slew Rate
RISE/FALL 0.8A/uS Sets the rising/falling slew
rate to 0.8A/uS
RISE/FALL 1 Sets the rising/falling slew
rate to 1A/uS