GW Instek PEL-2000 Series Programming User Manual - Manual (Page 44)

PEL-2000 Programming Manual
44
:CONFigure:PROTection:CURRent:LEVel
Channel Specific
Command
Description Sets the current protection level for the
current/specific channel. The level can be set to
any applicable level or to the channel
maximum/minimum.
Syntax :CONFigure:PROTection:CURRent:LEVel
<NRf>[A]|MIN|MAX
Parameter <NRf> Current Protection Level
.3 300mA
0.3A 300mA
300MA 300mA
MIN Sets to the minimum level
MAX Sets the current limit to
the maximum level
Example :CONF:PROT:CURR:LEV
MAX Sets the current limit to
20.40A (PEL2020)
Query Syntax : CONFigure:PROTection:CURRent:LEVel? [MIN|MAX]
Return Parameter <NRf> 1 unit = 1 amp Current protection level
1 1 amp.
MAX/MIN Returns the allowable
maximum and minimum.
Query Example :CONF:PROT:CURR:LEV?
0.30
Current protection level
is at 300mA.