GW Instek PEL-2000 Series Programming User Manual - Manual (Page 124)

PEL-2000 Programming Manual
124
Return Parameter <NR1> Event <NR1> Event
1 OC 16 OT
2 OV 32 G/N
4 OP 64 UVP
8 RV 128~65535 Not Used
Query Example :STAT:CHAN:EVEN?
1 An over current (OC)
event occurred since the
last time the Channel
Status Event register was
read.
:STATus:CHANnel:NTRansition/
PTRansition
Channel Specific
Command
Description Determines whether a negative transition (NTR
10) or positive (PTR 01) transition in the
Channel Status Condition register will set the
corresponding event in the Channel Status Event
register.
The mask values are the bit weights of the Channel
Status PTR/NTR filters. See page 164 for details.
Syntax :STATus:CHANnel:NTRansition/PTRansition <NR1>
Parameter <NR1> Condition <NR1> Condition
1 OC 16 OT
2 OV 32 G/N
4 OP 64 UVP
8 RV 128~65535 Not Used
Example :STAT:CHAN:NTR 12 OP (Bit 3) and RV (Bit 4)
are set as negative
transitions.
:STAT:CHAN:PTR 1 OC (Bit 1) is set as a
positive transition.