GW Instek PEL-2000 Series Programming User Manual - Manual (Page 113)

COMMAND DETAILS
113
Query Syntax :RESistance:DYNamic:HIGH:FALL? [MIN|MAX]
Return Parameter <NR2> [MAX|MIN] Slew rate
1 Unit=1 amp/uS Returns the slew rate.
MAX/MIN Returns the allowable
maximum and minimum.
Query Example :RES:DYN:HIGH:FALL?
MAX
0.8000 For high range dynamic
CR mode, the minimum
value for the falling slew
rate is 0.8 A/uS for the
specific channel.
:RESistance:DYNamic:HIGH:T1/T2
Channel Specific
Command
Description Sets the timers T1 and T2 for high range dynamic
CR mode.
Syntax :RESistance:DYNamic:HIGH:T1/T2 <NRf+>[S|ms]
Parameter <NRf+>[S] Timer T1/T2
T1/T2 0.1S Sets the T1/T2 time to 0.1
seconds.
T1/T2 1 Sets T1/T2 to 1 second.
T1/T2 MIN Sets the T1/T2 to the
minimum value.
T1/T2 MAX Sets the T1/T2 time to the
maximum time
Example :RES:DYNA:HIGH:T1 10S Sets the high range T1
time to 10 seconds for
the specific channel.
Query Syntax :RESistance:DYNamic:HIGH:T1/T2? [MIN|MAX]
Return Parameter <NR2> [MAX|MIN] T1/T2 time.
1 Unit=1 second Returns T1/T2 time.
MAX/MIN Returns the allowable
maximum and minimum.