GW Instek PEL-2000 Series Programming User Manual - Manual (Page 90)

PEL-2000 Programming Manual
90
:OCP:CHANnel:LAST
Channel Specific
Command
Description Queries or sets the current value for after the
DUT OCP protection has been activated.
Syntax :OCP:CHANnel:LAST {<NRf>[ A ] | MIN | MAX}
Parameter <NRF>[A] The current value in Amps.
MAX The maximum current value.
MIN The minimum current value.
Example :OCP:CHAN:LAST MAX Set the current value to
the maximum value.
Query Syntax :OCP:CHANnel:LAST?
Return Parameter <NR2> Returns the current value in Amps.
Query Example :OCP:CHAN:LAST?
3.0 Returns the current
value.
:OCP:CHANnel:STEP:TIME
Channel Specific
Command
Description Queries or sets how long the step time is for the
OCP Test Automation.
Syntax :OCP:CHANnel:STEP:TIME {<NRf>[ S ] | MIN | MAX}
Parameter <NRF>[S] The step time in seconds
(50mS~1600S).
MAX The maximum step time.
MIN The minimum step time.
Example :OCP:CHAN:STEP:TIME
MIN Set the step time to the
maximum value.
Query Syntax :OCP:CHANnel:STEP:TIME?
Return Parameter <NR2> Returns the step time in seconds.
Query Example :OCP:CHAN:STEP:TIME?
10.0 Returns the step time.