GW Instek PEL-2000 Series Programming User Manual - Manual (Page 72)

PEL-2000 Programming Manual
72
:FETCh:POWer?
Channel Specific
Status Command
Description This query returns the real-time power of the load
module input for the specific channel.
Syntax :FETCh:CURRent? <NR2>
Parameter <NR2> 1 unit= 1 amp
1 1 amp
Query Example :FETC:POW?
1.2 The specific channel is at
1.2 watts.
:FETCh:STATus?
Status Command
Description This query returns the status of the load module.
The returned value is the bit weight of the Channel
Status Register. See page 162.
Syntax :FETCh:STATus? <NR1>
Parameter <NR1> Condition <NR1> Condition
1 OC 16 OT
2 OV 32 G/N
4 OP 64 UVP
8 RV 16-128 Not Used
Query Example :FETC:STAT?
2 Over voltage (OV)
protection has been
triggered for the specific
channel.
:FETCh:ALLVoltage?
All Channel Status
Command
Description This query returns the voltage values of all the
load modules/channels in order from 1-8(PEL-
2004)/1-4(PEL2002).
Syntax :FETCh:ALLVoltage?