GW Instek PEL-2000 Series Programming User Manual - Manual (Page 119)

COMMAND DETAILS
119
:SPECification[:PASS]?
Channel Specific
Command
Description Displays if the Go/NoGo (specification) limit has
passed/failed for the current channel used.
Query Syntax :SPECification[:PASS]?
Return Parameter <NR1> Go/NoGo Specification
0 Fail
1 Pass
Query Example :SPEC:PASS?
0 Go/NoGo has failed
Query Example :SPEC?
0 Go/NoGo has failed
:SPECification[:PASS]:CHANnel/
ALLChannel/VOLTage/CURRent?
Channel Specific
Command
Description Queries if the voltage, current, current channel or
all channels have passed/failed the Go/NoGo
(specification) limits.
VOLTageCC, CR mode,
CURRentCV, CP mode
Query Syntax :SPECification[:PASS]:CHANnel/ALLChannel/VOLTage
/CURRent?
Return Parameter <NR1> Go/NoGo Specification
0 Fail
1 Pass
Query Example :SPEC:PASS:VOLT?
0 The test has exceeded
the Go/NoGo voltage
limits.
Query Example :SPEC:VOLT?
0 The test has exceeded
the Go/NoGo voltage
limits.