System:setup – GW Instek PEL-2000 Series Programming User Manual User Manual

Page 142

Advertising
background image

PEL-2000 Programming Manual

142

:SYSTem:SETup

System Command

Description

Sets or returns the system setup for the current
settings using block data. See the command syntax
on page 13 for more details.

Syntax

:SYSTem:SETup <block data>

Parameter

<block data>

System setup data

Example

:SYST:SET <block data> Loads the system setup

using block data.

Query Syntax

:SYSTem:SETup?

Return Parameter <block data>

Returns the system setup
as block data.

Query Example

:SYST:SET?
#<digits><byte
count><data><NL>

Returns the system
settings as block data.

Advertising
See also other documents in the category GW Instek Equipment: