GW Instek PEL-2000 Series Programming User Manual - Manual (Page 47)

COMMAND DETAILS
47
:CONFigure:PROTection:POWer:LEVel
Channel Specific
Command
Description Sets the power protection level for the
current/specific channel. The level can be set to
any applicable level or to the channel
maximum/minimum.
Syntax :CONFigure:PROTection:POWer:LEVel
<NRf>[W]|MIN|MAX
Parameter <NRf> Power Protection Level
200 200Watts
200W 200Watts
MIN Sets to the minimum level
MAX Sets the power limit to the
maximum level
Example :CONF:PROT:POW:LEV MAX Sets the power limit to
102W (PEL2020)
Query Syntax : CONFigure:PROTection:POWEr:LEVel? [MIN|MAX]
Return Parameter <NRf> Power protection level
1 unit = 1 watt Returns the power
protection level in Watts.
MAX/MIN Returns the allowable
maximum and minimum.
Query Example :CONF:PROT:POW:LEV?
75 Power protection level is
at 75 watts.
:CONFigure:PROTection:UVP:CLEar
All Channel
Command
Description Clears the under voltage power protection status.
Syntax :CONFigure:PROTection:UVP:CLEar
Example :CONF:PROT:UVP:CLE Clears the under voltage
protection.