GW Instek PEL-2000 Series Programming User Manual - Manual (Page 63)

COMMAND DETAILS
63
L1/L2 MAX Sets L1 or L2 to the
maximum Level for the
specific channel.
Example :CURR:DYN:L1 10 In CC dynamic mode,
Set L1 (level 1) to 10
amps.
Query Syntax :CURRent:DYNamic:L1/L2? [MIN|MAX]
Return Parameter <NR2> [MAX|MIN] Current
MAX/MIN Returns the allowable
maximum and minimum.
1 unit= 1 amp Returns the current of
L1/L2, or the maximum or
minimum current allowed.
Query Example :CURR:DYN:L2?
2.0400 Returns current for the
specific channel.
:CURRent:DYNamic:RISE/FALL
Channel Specific
Command
Description Sets the rising/falling slew rate for CC dynamic
mode for the specific channel and range.
Syntax :CURRent:DYNamic:RISE/FALL <NRf+>[A/uS]
Parameter <NRf+>[A/uS] Slew Rate
RISE/FALL 0.8A/uS Sets the rising/falling slew
rate to 0.8A/uS
RISE/FALL 1 Sets the rising/falling slew
rate to 1A/uS
RISE/FALL MIN Sets to the slowest
rising/falling slew rate.
RISE/FALL MAX Sets to the fastest
rising/falling slew rate.
Example :CURR:DYNA:RISE 1.1 Sets the rising slew rate
to 1.1A/uS.
Query Syntax : CURRent:DYNamic:RISE/FALL? [MIN|MAX]