GW Instek PEL-2000 Series Programming User Manual - Manual (Page 97)

COMMAND DETAILS
97
:PROGram:SEQuence:SHORt:TIME
Program Number
Specific
Description Sets the short time (seconds) for the current
program sequence.
Syntax :PROGram:SEQuence:SHORt:TIME <NRf>[S]
Parameter <NRf>[S] Short Time
0.0 0 seconds = OFF
0.1~60 0.1~60 seconds
0.1~60S 0.1~60 seconds
Example :PROG:SEQ:SHOR:TIME
0.5 The short time for the
program sequence is set
to .5 seconds
Query Syntax :PROGram:SEQuence:SHORt:TIME? <NR2>
Return Parameter <NR2> 1 unit = 1 second Short Time
0.0~60 Returns the short time for
the program sequence.
Query Example :PROG:SEQ:SHOR:TIME?
5 The short time for the
program sequence is 5
seconds.
:PROGram:SEQuence:MODE
Program Number
Specific
Description Sets the program sequence to Auto, Manual or
Skip mode.
Syntax :PROGram:SEQuence:MODE {MANUAL|AUTO|SKIP}
Parameter MANUAL Manual mode: program
sequence is run manually
AUTO Auto mode: program
sequence is run
automatically