GW Instek PEL-2000 Series Programming User Manual - Manual (Page 95)

COMMAND DETAILS
95
:PROGram:SEQuence
Program Number
Specific
Description Sets the Sequence number for the current program
number.
Syntax :PROGram:SEQuence <NR1>
Parameter <NR1> Sequence number
1~10 Number 1~10
Example :PROG:SEQ 1 Sets the sequence
number to 1 for the
current program
number.
Query Syntax :PROGram:SEQuence?
Return Parameter <NR1> Mainframe Scanning
1-10 Returns the current
sequence number
Query Example :PROG:SEQ?
1 The set sequence
number is 1.
:PROGram:MEMory
Program Number
Specific
Description Sets the memory number used for the current
program/sequence.
Syntax :PROGram:MEMory <NR1>
Parameter <NR1> Memory number
1~120 Number 1~120
Example :PROG:MEM 1 Sets the memory number
to 001.
Query Syntax :PROGram:MEMory?
Return Parameter <NR1> Mainframe Scanning
1-120 Returns the current
program number