GW Instek PEL-2000 Series Programming User Manual - Manual (Page 118)

PEL-2000 Programming Manual
118
SPECIFICATION Subsystem
:SPECification:UNIT .................................................... 118
:SPECification[:PASS]? ................................................. 119
:SPECification[:PASS]:CHANnel/
ALLChannel/VOLTage/CURRent? ............................. 119
:SPECification:VOLTage:H/L/C ................................. 120
:SPECification:CURRent:H/L/C .................................. 120
:SPECification:TEST: .................................................... 121
:SPECification:UNIT
Channel Specific
Command
Description Sets the Go/NoGo (specification) units as
percentages or values.
Syntax :SPECification:UNIT {PERCENT|0|VALUE|1}
Parameter PERCENT/0 Percentages
VALUE/1 Values
Example :SPEC:UNIT PERCENT Sets the Go/NoGo limits
as percentages
Query Syntax :SPECification:UNIT? <NR1>
Return Parameter <NR1> Go/NoGo Unit
0 Percent
1 Value
Query Example :SPEC:UNIT?
0 The Go/NoGo
(specification) units are
set as percent.