GW Instek PEL-2000 Series Programming User Manual - Manual (Page 34)

PEL-2000 Programming Manual
34
:CHANnel:ACTive
Channel Specific
Command
Description This command is for compatibility with other
instruments only and has no action.
Syntax :CHANnel ACTive {ON|1|OFF|1}
Parameter ON/1 Enabled
OFF/0 Disabled
Example :CHAN:ACT ON Enables the specific
channel.
:CHANnel:SYNCon
Channel Specific
Command
Description Turns independent mode on or off for the channel.
Syntax :CHANnel:SYNCon {ON|1|OFF|0}
Parameter ON/1 ON
OFF/0
OFF
Example :CHAN:SYNC ON
Enables the current
channel to receive
synchronized commands
Query Syntax :CHANnel:SYNCon?
Return Parameter <NR1> Sync Status
0 Independent mode is OFF
1 Independent mode is ON
Query Example :CHAN:SYNC?
0 Independent mode is set
to OFF for the channel.