GW Instek PEL-2000 Series Programming User Manual - Manual (Page 130)

PEL-2000 Programming Manual
130
Voltage Subsystem
:VOLTage:L1/L2 ........................................................... 130
:VOLTage:RECall .......................................................... 131
:VOLTage:AVALue/BVALue ........................................ 131
:VOLTage:CURRent ..................................................... 132
:VOLTage:MODE ......................................................... 133
:VOLTage:L1/L2
Channel Specific
Command
Description Sets the voltage of A Value or B Value in CV mode,
where L1 is A Value and L2 is B Value.
Syntax :VOLTage:L1/L2 <NRf+>[V]
Parameter <NRf+>[V] Voltage
10 10 volts
10V 10 volts
MIN Sets the voltage to the
minimum value for the
channel
MAX Sets the voltage to the
maximum value for the
channel
Example :VOLT:L1 10V Sets A Value to 10 volts
for the specific channel
:VOLT:L2 MAX Sets B Value to the
maximum allowed
voltage for the specific
channel.
Query Syntax :VOLTage:L1/L2? [MAX|MIN]
Return Parameter <NR2> 1 unit = 1 volt Voltage
10 Returns the voltage of the
specific channel.