GW Instek PEL-2000 Series Programming User Manual - Manual (Page 131)

COMMAND DETAILS
131
MAX/MIN Returns the allowable
maximum and minimum.
Query Example :VOLT:L1?
5
:VOLT:L1? MAX
81.6000 A Value is set to 5 volts.
Returns the maximum
settable voltage.
:VOLTage:RECall
Channel Specific
Command
Description Sets or queries whether A Value or B Value is the
currently active value in CV mode.
Syntax :VOLTage:RECall {A|0|B|1}
Parameter A/0 A
B/1 B
Example :VOLT:REC 1 Makes B Value the active
value.
Query Syntax :VOLTage:RECall?
Return Parameter <NR1> Value
0 A
1 B
:VOLTage:AVALue/BVALue
Channel Specific
Command
Description Sets the voltage of A Value or B Value in CV mode.
Syntax :VOLTage:AVALue/BVALue <NRf+>[V]
Parameter <NRf+>[V] Voltage
10 10 volts
10V 10 volts
MIN Sets the voltage to the
minimum value for the
channel